LIN – Linear interpolation
Block SymbolLicensing group: STANDARD
Function Description
The LIN block performs linear interpolation. The following figure illustrates the influence
of the input u and given interpolation points [u1, y1] and [u2, y2] on the output
y.
Input
u | Analog input of the block | Double (F64) |
Output
y | Analog output of the block | Double (F64) |
Parameters
u1 | x-coordinate of the 1st interpolation node | Double (F64) |
y1 | y-coordinate of the 1st interpolation node | Double (F64) |
u2 | x-coordinate of the 2nd interpolation node 1.0 | Double (F64) |
y2 | y-coordinate of the 2nd interpolation node 1.0 | Double (F64) |
[Previous] [Back to top] [Up] [Next]
2022 © REX Controls s.r.o., www.rexygen.com